Uncategorized

Dr Fixit Super Latex 302 – Waterproofing & Bonding Agent (Available at Rangi Paint Store)

1. Introduction — Why So Many Houses in Kenya Leak (Even New Ones)

If you live in Kenya, this story probably sounds familiar.

You build a new house. Everything looks perfect. Tiles are shiny, walls are freshly painted, ceilings are clean. Then 3–6 months later you start noticing:

  • brown patches on the ceiling below the bathroom
  • paint bubbling and peeling
  • musty smell in bedrooms
  • tiles popping or grout turning black
  • damp walls near the floor (rising damp)
  • water dripping during heavy Nairobi rains

The most painful part?
The fundi tells you:

“Ni grout tu imeharibika… tutaongeza cement.”

It works for 2 months.
Then the problem comes back.

Here is the truth

Most houses in Kenya do not leak because of tiles.
They leak because the concrete and plaster were never waterproofed.

Tiles are decorative.
They are not waterproofing.

Concrete and cement are porous materials. They absorb water like a sponge. Once water enters, it travels inside the slab and appears somewhere else — often a completely different room.

This is where Dr Fixit Super Latex 302 comes in.

It is one of the most important — and most misunderstood — construction chemicals used in waterproofing bathrooms, balconies, slabs, and external walls.

When used correctly, it stops:

  • bathroom leaks
  • balcony seepage
  • damp walls
  • plaster cracking
  • tiles detaching

And it does this before the problem starts.


2. What is Dr Fixit Super Latex 302?

Simple Explanation

Dr Fixit Super Latex 302 is a liquid additive mixed with cement to make the cement waterproof and stronger.

Think of it as:

“Medicine for cement.”

Instead of cement becoming weak and porous after drying, it becomes dense, flexible, and water-resistant.


Technical Explanation

Dr Fixit Super Latex 302 is an SBR latex polymer (Styrene-Butadiene Rubber) bonding and waterproofing agent.

Normally, when cement cures:

  • it forms microscopic capillaries
  • water travels through those pores

The latex polymer fills these capillaries and creates a polymer-modified cement matrix. This reduces permeability dramatically and increases adhesion.

That is why it is called both:

  • Waterproofing agent
  • Bonding agent for cement

What Makes It Different From Other Waterproofing Chemicals?

Many people compare it with bitumen or waterproof paint.

But those are surface coatings.

Super Latex is different because:
It waterproofs the cement itself — not just the surface.

So even if tiles crack or grout fails, the slab still remains protected.


3. What Does It Actually Do? (Very Important)

Here is exactly what happens when you mix Dr Fixit Super Latex 302 with cement.

1. Bonds Old Concrete to New Concrete

If you plaster over an existing slab without a bonding agent, the plaster eventually separates.

Super Latex acts like glue between:

  • old slab and new plaster
  • repair mortar and existing wall
  • screed and concrete floor

2. Reduces Cracks

Normal cement is brittle.

Kenyan weather causes expansion and contraction:

  • hot sun during the day
  • cold nights
  • heavy rain

Latex adds flexibility, reducing shrinkage cracks.


3. Waterproofs Cement

This is the main benefit.

It blocks:

  • seepage
  • capillary water movement
  • dampness

Water cannot easily travel through the cement matrix.


4. Improves Strength

Polymer-modified cement has:

  • higher tensile strength
  • higher adhesion
  • better durability

That is why tiles fixed over latex-modified mortar rarely pop.


5. Stops Dampness and Seepage

This is critical in Kenya where many homes suffer:

  • rising damp
  • balcony leaks
  • tank leakage
  • roof slab seepage

Super Latex reduces permeability drastically.


4. Where Can It Be Used?

Bathrooms (Before Tiling)

The most important use.

Every bathroom slab should be waterproofed before tiles.


Balconies

Balconies fail frequently because rainwater sits on tiles.
Without waterproofing → water reaches the slab → leaks into living room.


Roof Slabs & Terraces

Flat roofs and terraces crack due to sun exposure.

Latex-modified screed prevents seepage.


Water Tanks

Internal cement plaster mixed with Super Latex reduces leakage and contamination.


Basement Walls

Helps resist moisture penetration from soil.


Plaster Repairs

Perfect for repairing:

  • hollow plaster
  • cracks
  • damp patches

External Walls (Before Painting)

Prevents paint peeling caused by dampness.


Tile Fixing

Adding Super Latex to tile adhesive improves bonding and prevents tile popping.


5. Step-by-Step Application Guide (Site Manual Style)

Step 1: Surface Preparation

This is where 70% of fundis fail.

Do:

  • remove dust
  • remove oil/paint
  • remove loose concrete
  • clean thoroughly

Important:
Surface must be damp — not wet.


Step 2: Crack Repair

Open cracks into a V-shape and fill using cement mortar mixed with Super Latex.


Step 3: Bonding Slurry Coat

Mix:

  • cement
  • water
  • Super Latex

Apply using a brush.

This coat acts as the waterproofing base.


Step 4: Plaster / Screed Application

Apply plaster or screed while slurry is still tacky.


Step 5: Curing

Cure for at least 5–7 days.

This is extremely important.

No curing = waterproofing failure.


Step 6: Tiling

After curing:

  • apply tile adhesive
  • fix tiles
  • grout after 24 hours

6. Mixing Ratios (Very Important)

Waterproofing Slurry

1 cement : latex solution (1 part Super Latex + 2 parts water)


Plaster

1 cement : 3 sand
Replace 15–20% mixing water with Super Latex solution.


Screed

1 cement : 2.5 sand
Add Super Latex solution instead of part of water.


Repair Mortar

1 cement : 2 sand
Add Super Latex solution.


Bonding Coat

1 cement + Super Latex solution → brush coat.


7. Before Tiling — The Most Important Use

Why Bathrooms Leak

Water passes through:

  • grout joints
  • tile edges
  • hairline cracks

Tiles are not waterproof.
Grout is not waterproof.

They only slow water — they do not stop it.


Correct Waterproofing Layer System

Concrete slab

Super Latex slurry coat

Latex-modified plaster/screed

Tile adhesive

Tiles

Grout

This is called waterproofing before tiling.


8. Common Mistakes People Make

  1. Applying on dusty surfaces
  2. Not curing
  3. Wrong mixing ratio
  4. Tiling immediately
  5. Using it like paint
  6. Only applying grout
  7. Waterproofing after tiles
  8. Skipping bonding coat
  9. Using pure cement slurry only
  10. Waterproofing only walls but not floor

9. Comparison

MaterialWaterproof?Permanent?Notes
BitumenSurface onlyMediumPeels under tiles
Waterproof cementLimitedLowCracks
MembraneGoodExpensiveSkilled labour needed
Tile groutNoNoDecorative only
Ordinary bonding agentAdhesion onlyNoNot waterproof
Dr Fixit Super Latex 302YesLong-termInternal waterproofing

10. Coverage & Consumption Guide

Approximate usage:

AreaQuantity
Small bathroom (3×3 m)2–3 litres
Medium bathroom3–4 litres
Balcony4–6 litres
100 sqm slab18–22 litres

Depends on surface porosity.


11. Frequently Asked Questions

Is Dr Fixit Super Latex 302 waterproof by itself without cement?

No. Dr Fixit Super Latex 302 must be mixed with cement or mortar. The waterproofing effect happens when the latex polymer modifies the cement matrix.

Can tiles be installed directly over Dr Fixit Super Latex 302 waterproofing?

Yes, but only after the latex-modified plaster or screed has cured properly (minimum 5–7 days). Tiles should be fixed using tile adhesive, not cement only.

Can Dr Fixit Super Latex 302 stop a leaking bathroom floor?

Yes — but only if applied underneath the tiles. If the tiles are already installed, they usually need to be removed so waterproofing can be done at the slab level.

Can Dr Fixit Super Latex 302 be used for waterproofing bathrooms in Kenya before tiling?

Yes. This is actually the most recommended use. Apply a slurry coat and latex-modified plaster before installing tiles.

Does tile grout waterproof a bathroom instead of using Dr Fixit Super Latex 302?

No. Tile grout is decorative and only fills gaps between tiles. It cannot waterproof a bathroom slab.

Is Dr Fixit Super Latex 302 applied before plastering or after plastering?

It is applied both ways:
• as a bonding slurry before plaster
• and mixed into the plaster mortar itself.

Can Dr Fixit Super Latex 302 fix rising damp on interior walls?

Yes. When mixed with plaster and applied on walls affected by rising damp, it significantly reduces moisture penetration.

Can Dr Fixit Super Latex 302 be mixed with paint for waterproofing walls?

No. It is a cement additive, not a paint additive. Mixing it with paint will not waterproof a wall.

How long should Dr Fixit Super Latex 302 waterproofing cure before tiling?

Allow at least 5–7 days curing with moisture curing (sprinkling water). Proper curing is essential for waterproofing performance.

Is curing necessary after applying Dr Fixit Super Latex 302?

Yes. Without curing, the cement layer can crack and lose waterproofing ability.

Can Dr Fixit Super Latex 302 be used on old houses with damp walls?

Yes. It is very effective for repairing damp plaster and sealing old concrete surfaces before repainting.

Can Dr Fixit Super Latex 302 waterproof a balcony or terrace?

Yes. It is widely used for balcony waterproofing and terrace screed waterproofing before tiling or finishing.

Can Dr Fixit Super Latex 302 be used inside a water tank?

Yes, when used in waterproof plaster. The tank must also be properly cured before use.

Is Dr Fixit Super Latex 302 better than bitumen for bathroom waterproofing?

For under-tile waterproofing, yes. Bitumen is a surface coating while Super Latex waterproofs the cement itself.

Can Dr Fixit Super Latex 302 prevent tiles from popping off floors or walls?

Yes. The bonding properties improve adhesion between tile adhesive and substrate, reducing tile detachment.

Can Dr Fixit Super Latex 302 repair cracks in concrete floors?

Yes, when used in repair mortar. However, large structural cracks may require structural repair first.

Can Dr Fixit Super Latex 302 be used on external walls before painting?

Yes. When added to plaster, it reduces dampness and helps prevent paint peeling.

Does Dr Fixit Super Latex 302 replace tile adhesive?

No. Tile adhesive is still required to fix tiles properly.

Can Dr Fixit Super Latex 302 stop ceiling stains caused by bathroom leaks?

Yes, if applied above the slab (the bathroom floor) before tiling.

Can Dr Fixit Super Latex 302 be applied using a brush?

Yes. The cement slurry mixed with Dr Fixit Super Latex 302 is applied using a brush as a bonding and waterproofing coat.

Can Dr Fixit Super Latex 302 waterproof a roof slab?

Yes. When used in screed plaster on roof slabs, it helps prevent seepage and rainwater penetration.

Can fundis and tilers apply Dr Fixit Super Latex 302 without special machines?

Yes. Only basic tools like a bucket, mixer, trowel, and brush are required.

How much Dr Fixit Super Latex 302 is needed for a typical Kenyan bathroom?

Usually about 2–4 litres depending on bathroom size and surface condition.

Can Dr Fixit Super Latex 302 be used together with tile adhesive?

Yes. It can be used in the substrate below tiles and can also improve cement-based adhesives.

Is Dr Fixit Super Latex 302 suitable for balcony waterproofing in rainy climates like Nairobi?

Yes. It is especially useful in areas exposed to frequent rain and temperature changes.


12. Who Should Use It?

  • Homeowners building houses
  • Landlords tired of repairs
  • Contractors
  • Fundis (tilers & masons)
  • Painters dealing with peeling paint
  • Developers

13. Why Buy From Rangi Paint Store?

At Rangi Paint Store you get:

  • Genuine Dr Fixit Super Latex 302
  • Application guidance
  • Quantity estimation
  • Waterproofing advice
  • Technical support

Many failures happen not because of the product — but because of wrong application. We guide you before you waste money.


14. Conclusion

Waterproofing is not about tiles.
It is about protecting the structure.

If you waterproof after leaks appear, repairs become expensive and destructive.

But if you waterproof before tiling using Dr Fixit Super Latex 302, you stop problems permanently:

  • no ceiling stains
  • no damp smell
  • no popping tiles
  • no repainting every year

For correct advice and genuine materials, visit or contact Rangi Paint Store and get professional guidance on waterproofing your bathroom, balcony, slab, or damp walls.

Do it once. Do it correctly. Avoid years of repair costs.

Dr Fixit Super Latex 302 – Waterproofing & Bonding Agent (Available at Rangi Paint Store)
Summary
Article Name
Dr Fixit Super Latex 302 Waterproofing Guide – Bathroom, Balcony & Damp Wall Repair in Kenya
Description
Complete expert guide explaining how to use Dr Fixit Super Latex 302 for waterproofing before tiling, fixing leaking bathrooms, balcony seepage and rising damp walls. Includes mixing ratios, application steps and common mistakes to avoid.
Author
Publisher Name
Rangi Paint Store
Publisher Logo
mainah

Recent Posts

Dr. Fixit LW+ 101 (Pidiproof) Tonic for Cement – Complete Waterproofing Guide in Kenya

Introduction — The Real Reason Walls Become Damp In many Kenyan homes, the problem starts…

1 week ago

Top Reasons Businesses Are Switching to Epoxy Floor Paints in 2026

Introduction In 2026, more companies are choosing epoxy floor paint for businesses in Kenya because…

1 week ago

Epoxy Floor Paint in Kenya: The Complete 2026 Guide (Coverage, Application, Cost & Mistakes)

If you’re looking for a durable, glossy, and long-lasting floor finish, epoxy floor paint in…

1 week ago

Why Quality Paint Matters: Don’t Let Cheap Paint Ruin Your Walls

When it comes to painting your home or office, it’s tempting to save a few…

2 weeks ago

🟢 Where Can I Find Eco‑Friendly Paint Options in Nairobi?

As awareness of environmental health grows, many homeowners, businesses, and contractors in Nairobi are asking…

4 weeks ago

Cerazzo Tile Cleaner: The Trusted Solution for Terrazzo & Tile Cleaning in Kenya

Available at Rangi Paint Store Keeping terrazzo and tiled surfaces clean can be challenging, especially…

4 weeks ago