Crown Road Marking Paint Technical Data Sheet (TDS) PDF Download – Kenya
Download the official Technical Data Sheet (TDS) for Crown Road Marking Paint. This document contains manufacturer specifications, coverage rate, drying time, reflectivity performance, and correct application procedures used by contractors, road construction companies, and facility managers in Kenya.
Technical Specifications
| Product Type | High Visibility Traffic & Road Marking Paint |
|---|---|
| Finish | Matt / Reflective Finish (White, Yellow & Other Standard Road Colours) |
| Coverage | Approximately 4–6 m² per litre depending on surface texture and film thickness |
| Drying Time | Touch dry: 10–30 minutes | Traffic ready: 45–120 minutes | Full cure: 24–48 hours |
| Application | Brush, Roller, Airless Spray or Road Marking Machine |
| Recommended Film Thickness | 120–250 microns (dry film thickness) |
Download Technical Data Sheet (PDF)
Download Crown Road Marking Paint TDS PDFApplication & Thinning Instructions
Crown Road Marking Paint is designed for fast drying and high visibility performance. Proper surface preparation and correct film thickness are critical for durability under traffic.
Thinning may be done only if necessary using approved thinner. Over-thinning reduces opacity, durability and reflectivity.
Thinning Guidelines (Important)
- Spray application: Thin up to 5–10% with recommended thinner if required.
- Brush/Roller: Normally apply without thinning for best film build.
Excessive thinning reduces wear resistance and may cause premature fading under heavy traffic.
Surface Preparation
- Surface must be clean, dry and free from dust, oil and loose debris
- Remove grease and contaminants completely
- Ensure asphalt or concrete is fully cured before application
- Repair major cracks or potholes prior to painting
Poor preparation may cause peeling, flaking or rapid wear under traffic conditions.
Application Method
- Brush (small jobs)
- Roller
- Airless spray system
- Road line marking machine (recommended for highways)
Recommended coats: 1–2 coats depending on opacity and traffic requirements
Apply evenly to achieve recommended dry film thickness. Too thin application reduces lifespan, while excessively thick films may crack.
Reflectivity & Bead Application
For enhanced night visibility, apply reflective glass beads while the paint is still wet. This improves retro-reflectivity and road safety performance.
- Broadcast beads immediately after paint application
- Ensure uniform distribution for maximum visibility
- Use approved road marking beads for compliance
Common Uses
- Highway center lines
- Edge lines
- Pedestrian crossings
- Parking bay markings
- Industrial yards
- Airport aprons (where specified)
More Technical Data Sheets
Browse all paint datasheets: Paint Technical Data Sheets (TDS)
Check availability and pricing: View Crown Road Marking Paint Product Page
Professional Application Guidance
The technical data sheet provides manufacturer specifications, but correct site application determines durability and compliance with road standards.
Our detailed road marking application guide for Kenyan conditions is coming soon, covering machine setup, film thickness control, bead broadcasting and traffic reopening timelines.
This guide will help contractors avoid common failures such as premature fading, poor adhesion, or low night reflectivity.
Frequently Asked Questions – Crown Road Marking Paint (Kenya)
What is Crown Road Marking Paint used for in Kenya?
Crown Road Marking Paint is used for marking highways, road center lines, pedestrian crossings, parking bays, industrial yards, warehouse floors, and airport aprons on asphalt and concrete surfaces across Kenya.
What is the coverage rate of Crown Road Marking Paint per litre?
Crown Road Marking Paint typically covers approximately 4–6 square metres per litre, depending on the surface texture, porosity, and the film thickness applied.
How long does Crown Road Marking Paint take to dry before traffic can use the road?
Crown Road Marking Paint becomes touch dry within 10–30 minutes and is usually ready for traffic within 45–120 minutes at 25°C, depending on weather conditions and application thickness.
Can Crown Road Marking Paint be applied on asphalt and concrete surfaces?
Yes, Crown Road Marking Paint is suitable for both fully cured asphalt and concrete surfaces, provided they are clean, dry, and free from dust, oil, grease, or loose materials.
Does Crown Road Marking Paint require thinning before application?
Crown Road Marking Paint does not normally require thinning. However, for spray applications, it may be thinned up to 5–10% using the manufacturer’s recommended thinner.
How many coats of Crown Road Marking Paint should be applied?
One to two coats are generally sufficient, depending on opacity requirements, colour visibility, and expected traffic exposure.
Can Crown Road Marking Paint be applied using a road marking machine?
Yes, Crown Road Marking Paint is compatible with professional road marking machines, airless spray systems, rollers, and brushes for smaller jobs.
How can night visibility be improved when using Crown Road Marking Paint?
Night visibility can be significantly improved by broadcasting approved reflective glass beads onto the wet paint immediately after application to enhance retro-reflectivity.
What is the recommended film thickness for Crown Road Marking Paint?
The recommended dry film thickness is approximately 120–250 microns to ensure durability and resistance under traffic conditions.
What surface preparation is required before applying Crown Road Marking Paint?
The surface must be clean, dry, and free from dust, oil, grease, and loose debris. Any major cracks or defects should be repaired before application.
Is Crown Road Marking Paint suitable for heavy traffic areas?
Yes, it is formulated for abrasion resistance and durability, making it suitable for highways, busy roads, industrial yards, and high-traffic environments when properly applied.
What are the ideal temperature conditions for applying Crown Road Marking Paint?
It should ideally be applied at temperatures between 10°C and 35°C with relative humidity below 85% for proper drying and adhesion.
How long does Crown Road Marking Paint take to fully cure?
It typically reaches full curing within 24–48 hours, depending on environmental conditions and film thickness.
Can Crown Road Marking Paint be used for parking lot and warehouse markings?
Yes, it is widely used for parking bays, directional arrows, loading zones, safety demarcations, and warehouse floor markings.
How should tools and equipment be cleaned after applying Crown Road Marking Paint?
Brushes, rollers, and spray equipment should be cleaned immediately after use with the recommended solvent or thinner before the paint dries and hardens.