Crown Vinyl Matt Paint Technical Data Sheet (TDS) – Kenya
Download the official Technical Data Sheet (TDS) for Crown Vinyl Matt Paint. This document provides manufacturer specifications, coverage rate, drying time, surface preparation instructions, and recommended application procedures used by professional painters and contractors in Kenya.
Technical Specifications
| Product Type | Interior Vinyl Matt Emulsion Paint |
|---|---|
| Finish | Flat Matt Decorative Finish |
| Coverage | Approximately 10–14 m² per litre per coat depending on surface condition and application method |
| Drying Time | Touch dry: 30–60 minutes | Recoat: 2–4 hours |
| Application | Brush, Roller, or Spray Gun |
| Thinning | Thin with clean water if necessary (up to 10%) |
Download Technical Data Sheet (PDF)
Download Crown Vinyl Matt Paint TDS PDFSurface Preparation
- Ensure surfaces are clean, dry and free from grease, oil and loose particles
- New plaster should cure for at least 21 days before painting
- Apply suitable wall sealer or primer before applying paint
- Remove loose paint from previously painted surfaces
- Fill cracks and imperfections with appropriate filler
Improper surface preparation can lead to poor adhesion and uneven paint finish.
Application Method
- Brush
- Paint Roller
- Spray gun
Recommended coats: 2 coats
Apply evenly and allow each coat to dry completely before applying the next coat. Avoid painting during extremely humid or dusty conditions.
Common Uses
- Interior walls
- Ceilings
- Residential houses
- Offices
- Schools
- Commercial buildings
Key Benefits
- Low sheen matt decorative finish
- Good coverage and hiding power
- Helps hide minor surface imperfections
- Low odour and easy application
- Suitable for large wall areas
More Technical Data Sheets
Browse all paint datasheets: Paint Technical Data Sheets (TDS)
Check availability and pricing: View Crown Vinyl Matt Paint Product Page
Application Guidance & Professional Usage
The technical data sheet provides manufacturer specifications, but correct preparation and application improve coverage and ensure a smooth matt finish.
Professional painters recommend using a primer or wall sealer before applying Crown Vinyl Matt Paint to new plaster to improve durability and reduce paint consumption.
This guide explains recommended application practices used by painters in Kenyan homes and commercial projects.
Frequently Asked Questions
What is Crown Vinyl Matt Paint used for?
Crown Vinyl Matt Paint is used for decorating interior walls and ceilings where a smooth non-reflective matt finish is required.
What type of finish does Crown Vinyl Matt Paint produce?
Crown Vinyl Matt Paint produces a flat matt finish that helps hide small surface imperfections and provides a modern decorative appearance.
How many coats of Crown Vinyl Matt Paint should be applied?
Two coats are normally recommended to achieve full coverage and a uniform finish.
How long does Crown Vinyl Matt Paint take to dry?
The paint becomes touch dry within 30–60 minutes and can typically be recoated after 2–4 hours.
Can Crown Vinyl Matt Paint be thinned before application?
Yes. Crown Vinyl Matt Paint can be thinned with clean water by up to 10% if required for easier application.
Can Crown Vinyl Matt Paint be applied with a roller?
Yes. Crown Vinyl Matt Paint can be applied using a brush, roller, or spray gun depending on the surface and project size.
What surfaces can Crown Vinyl Matt Paint be applied to?
Crown Vinyl Matt Paint can be applied to interior plaster, concrete, gypsum board, and properly prepared previously painted surfaces.
Is Crown Vinyl Matt Paint suitable for ceilings?
Yes. The matt finish helps hide ceiling imperfections and provides an even decorative appearance.
Should a primer be applied before Crown Vinyl Matt Paint?
Yes. Applying a suitable primer or wall sealer improves adhesion and ensures better paint coverage.
Can Crown Vinyl Matt Paint be used outdoors?
No. Crown Vinyl Matt Paint is designed for interior surfaces. Exterior walls require weather-resistant exterior paints.