Crown Aqua Glow Water-Based Enamel Technical Data Sheet (TDS) – Kenya
Download the official Technical Data Sheet (TDS) for Crown Aqua Glow Water-Based Enamel, a premium water-based high-gloss enamel coating designed for decorative and protective finishing on wood, metal, masonry, and interior/exterior surfaces in Kenya.
Crown Aqua Glow delivers a durable glossy finish with fast drying performance, low odor formulation, excellent washability, and good UV resistance for residential, commercial, and light industrial decorative applications.
Proper surface preparation, priming, and recommended drying intervals are essential for maximum adhesion, gloss retention, and coating durability.
Explore more decorative coatings in our protective coatings category, browse professional waterproofing products, shop premium paint accessories, rollers & brushes, and discover complete paint bundles for residential and commercial painting projects in Kenya.
You can also estimate paint quantities using our paint calculator, explore more technical data sheets, read our professional painting paint accessories blog guide, or browse all paint products available in Kenya.
Technical Specifications
| Product Name | Crown Aqua Glow Water-Based Enamel |
|---|---|
| Product Type | Water-Based Acrylic High-Gloss Enamel Paint |
| Finish | Gloss / High Sheen |
| Recommended Use | Decorative and protective coating for wood, metal, masonry, and plaster surfaces |
| Application Method | Brush, Roller, Conventional Spray, Airless Spray |
| Coverage | 10–12 m² per litre per coat depending on surface porosity |
| Touch Dry | 30–60 minutes at normal ambient conditions |
| Recoat Interval | 2–3 hours |
| Recommended Coats | Minimum 2 coats |
| Dilution | Clean water up to 10% if necessary |
| VOC Level | Low VOC Water-Based Formulation |
| Odor Level | Low Odor |
| Washability | High washable finish after curing |
| UV Resistance | Good resistance for interior and exterior applications |
| Adhesion | Excellent adhesion on properly prepared surfaces |
| Application Temperature | Recommended between 10°C and 35°C |
| Storage Conditions | Store in cool dry conditions away from direct sunlight and freezing temperatures |
| Shelf Life | 12–24 months unopened under proper storage conditions |
Download Crown Aqua Glow Water-Based Enamel TDS PDF
Download Crown Aqua Glow Water-Based Enamel TDS PDFRecommended Surface Preparation
- Ensure surfaces are dry, clean, and free from dust, grease, oil, and loose material
- Remove flaking or poorly bonded old paint before application
- Sand glossy surfaces lightly to improve coating adhesion
- Prime bare wood and metal surfaces using suitable compatible primers
- Treat rusted metal surfaces before applying finish coats
- Fill cracks and surface imperfections where necessary
Application Instructions
- Stir paint thoroughly before use
- Apply evenly using brush, roller, or spray equipment
- Avoid excessive film build-up during application
- Allow recommended drying interval before recoating
- Apply minimum two coats for best durability and finish uniformity
- Clean tools immediately after use with clean water
Suitable Surfaces
- Wooden doors, cabinets, and furniture
- Metal gates, grills, railings, and frames
- Interior decorative wall features
- Masonry, plaster, and cement-based surfaces
- Commercial and residential decorative finishing projects
Typical Uses in Kenya
- Residential home repainting projects
- Interior and exterior decorative finishing
- Gloss finishing for furniture and cabinetry
- Protection of metal gates and steel fabrications
- Commercial office and retail decoration works
Comparison: Water-Based vs Solvent-Based Enamel Paint
| Feature | Crown Aqua Glow | Traditional Solvent Enamel |
|---|---|---|
| Base Technology | Water-Based | Solvent-Based |
| Odor Level | Low Odor | Strong Solvent Odor |
| Drying Speed | Fast Drying | Slower Drying |
| Tool Cleanup | Water Cleanup | Requires Thinner |
| Indoor Air Safety | Improved Indoor Comfort | Higher Solvent Emissions |
| Environmental Impact | Lower VOC | Higher VOC |
Key Benefits
- Premium high-gloss decorative finish
- Fast drying water-based technology
- Low odor for improved indoor comfort
- Excellent adhesion and durability
- Easy water cleanup after application
- Good UV and weather resistance
- Washable and easy to maintain
Limitations
- Not intended for continuous chemical immersion environments
- Surface preparation significantly affects final performance
- Bare metal surfaces require appropriate primer systems
- Avoid application during rain or extremely humid conditions
Safety Precautions
- Use in well ventilated areas during application and drying
- Avoid direct eye contact and prolonged skin exposure
- Keep container tightly closed when not in use
- Keep away from children and food preparation areas
- Refer to product safety information before large-scale application
Frequently Asked Questions (FAQs)
What is Crown Aqua Glow Water-Based Enamel used for?
Crown Aqua Glow is used for decorative and protective finishing on wood, metal, masonry, plaster, and selected interior/exterior surfaces.
Can Crown Aqua Glow be applied on metal surfaces?
Yes. Properly primed metal gates, grills, and railings can be coated using Crown Aqua Glow for decorative protection.
How long does Crown Aqua Glow take to dry?
The coating becomes touch dry within approximately 30–60 minutes under normal drying conditions.
Is Crown Aqua Glow suitable for indoor applications?
Yes. Its low odor and low VOC water-based formulation makes it suitable for interior decorative painting projects.
How many coats are recommended?
A minimum of two coats is recommended for proper opacity, durability, and finish consistency.