Crown Silk Vinyl Paint Technical Data Sheet (TDS) – Kenya
Download the official Technical Data Sheet (TDS) for Crown Silk Vinyl Paint. This document contains manufacturer specifications, coverage rate, drying time, surface preparation requirements, and recommended application procedures used by professional painters and contractors in Kenya.
Technical Specifications
| Product Type | Interior Vinyl Silk Emulsion Paint |
|---|---|
| Finish | Smooth Silk Sheen Finish |
| Coverage | Approximately 10–14 m² per litre per coat depending on surface condition and method of application |
| Drying Time | Touch dry: 30–60 minutes | Recoat: 2–4 hours |
| Application | Brush, Roller, or Spray Gun |
| Thinning | Thin with clean water if necessary (up to 10%) |
Download Technical Data Sheet (PDF)
Download Crown Silk Vinyl Paint TDS PDFSurface Preparation
- Surface must be clean, dry and free from grease, oil and dust
- New plaster should be fully cured for at least 21 days
- Apply an appropriate wall sealer or primer before painting
- Remove loose or flaking paint from previously painted surfaces
- Fill cracks and imperfections using suitable filler
Poor surface preparation can cause peeling, uneven finish or poor paint adhesion.
Application Method
- Brush
- Paint Roller
- Spray gun
Recommended coats: 2 coats
Apply evenly and allow each coat to dry completely before applying the next coat. Avoid painting in extremely humid or dusty conditions.
Common Uses
- Interior walls
- Living rooms
- Bedrooms
- Offices
- Commercial interior spaces
- Ceilings
Key Benefits
- Smooth silk finish with attractive sheen
- Easy to clean and maintain
- Good coverage and hiding power
- Low odour and easy application
- Durable decorative finish
More Technical Data Sheets
Browse all paint datasheets: Paint Technical Data Sheets (TDS)
Check availability and pricing: View Crown Silk Vinyl Paint Product Page
Application Guidance & Professional Usage
The technical data sheet provides manufacturer specifications, but correct application technique ensures better coverage and long-lasting finish.
Professional painters recommend applying a quality primer or sealer before painting new plaster to improve adhesion and reduce paint consumption.
This guide explains recommended application practices used by painters in Kenyan residential and commercial projects.
Frequently Asked Questions
What is Crown Silk Vinyl Paint used for?
Crown Silk Vinyl Paint is used for interior wall decoration where a smooth, washable and soft sheen finish is required.
What finish does Crown Silk Vinyl Paint provide?
Crown Silk Vinyl Paint provides a smooth silk or soft sheen finish that reflects light slightly and enhances interior walls.
Where can Crown Silk Vinyl Paint be applied?
Crown Silk Vinyl Paint can be applied on plaster, concrete, brickwork, gypsum boards and previously painted interior surfaces.
Is Crown Silk Vinyl Paint washable?
Yes. Crown Silk Vinyl Paint forms a washable surface that allows light cleaning with a damp cloth or sponge.
How many coats of Crown Silk Vinyl Paint should be applied?
Two coats are normally recommended to achieve full colour development and an even finish.
How long does Crown Silk Vinyl Paint take to dry?
Crown Silk Vinyl Paint is usually touch dry within 30 minutes to 1 hour and can be recoated after about 2–4 hours.
Can Crown Silk Vinyl Paint be thinned?
Yes. Crown Silk Vinyl Paint can be thinned with clean water when necessary, especially for the first coat.
What tools can be used to apply Crown Silk Vinyl Paint?
Crown Silk Vinyl Paint can be applied using a brush, roller or spray gun depending on the project requirements.
Is Crown Silk Vinyl Paint suitable for kitchens and living rooms?
Yes. Crown Silk Vinyl Paint is suitable for living rooms, bedrooms, corridors and kitchens where a decorative washable finish is desired.
How should surfaces be prepared before applying Crown Silk Vinyl Paint?
Surfaces should be clean, dry and free from dust, grease or loose material. New plaster should be primed before painting.
Does Crown Silk Vinyl Paint require a primer on new walls?
Yes. New masonry surfaces should be sealed with a suitable primer or undercoat before applying Crown Silk Vinyl Paint.
Can Crown Silk Vinyl Paint be used on exterior walls?
No. Crown Silk Vinyl Paint is designed for interior surfaces and should not be used for exterior wall protection.
What coverage can be expected from Crown Silk Vinyl Paint?
Coverage is approximately 10–12 square metres per litre per coat depending on surface porosity and application method.
Can Crown Silk Vinyl Paint be applied over previously painted walls?
Yes. Previously painted walls should be cleaned and lightly sanded if necessary to ensure proper adhesion.