Description
Crown Two-Pack Epoxy Floor Paint
High-performance two-pack epoxy coating for concrete floors in warehouses, garages, laboratories, hospitals, and industrial spaces. Designed for maximum resistance to chemical, pedestrian, and vehicular traffic.
Crown Two-Pack Epoxy Floor Paint
Crown Two-Pack Epoxy Floor Paint is a high-performance two-component protective coating designed for concrete floors exposed to heavy traffic and aggressive environments. It forms a tough, impervious film offering excellent chemical resistance, durability, and long-term floor protection in industrial, commercial, and institutional facilities.
Important: Do not apply over previously painted surfaces or onto new concrete that has not fully cured and dried.
Key Characteristics
- Two-component epoxy resin system
- Hard, gloss protective finish
- Excellent abrasion resistance
- Strong adhesion to properly prepared concrete
- Long-lasting industrial floor protection
Chemical Resistance
- Detergents and cleaning chemicals
- Bleaches and disinfectants
- Weak acids & alkalis (10%)
- Oils, fats and grease
- Fruit juices and common solvents
Advantages
- Decorative and protective coating
- Resists pedestrian and vehicle traffic
- Suitable for wet-cleaning environments
- Ideal for hygienic and industrial areas
Available Finish
- Gloss
Application & Thinning
- Apply by brush, roller or spray
- Mix base and hardener thoroughly
- Allow 15–20 minutes induction time
- Thin first coat ~20% using Epoxy Thinners
- Pot life approximately 12 hours
Drying & Coverage
- Pot life: ~12 hours at 18°C
- Full cure: 4–5 days
- Chemical resistance after full cure
- Coverage: 8–12 m² per litre per coat
Recommended Uses
Suitable for chemical plants, dairies, breweries, hospitals, laboratories, food factories, bottling plants, vehicle showrooms, warehouses, garages, and other high-traffic concrete floors.
Surface Preparation
New Concrete: Ensure concrete is fully cured and dry. Clean thoroughly and remove laitance. Apply two coats, thinning the first coat for improved penetration and adhesion.
Previously Painted Floors: Remove all existing coatings completely. Mechanical grinding or sanding is recommended for proper adhesion.
Best Practice Guidelines
- Clean surface thoroughly before coating
- Apply several thin coats rather than one thick coat
- Use protective equipment when mixing and spraying
- Avoid application on damp floors or rising moisture
- Allow full curing before heavy traffic
Frequently Asked Questions (FAQ)
Can I apply Crown Two-Pack Epoxy Floor Paint over an existing painted surface?
No. Previously painted surfaces must be fully stripped and prepared before applying Crown Two-Pack Epoxy Floor Paint.
Is Crown Two-Pack Epoxy Floor Paint suitable for all concrete floors?
Yes. It is suitable for new or fully cured concrete floors in industrial, commercial, and high-traffic areas.
How long does Crown Two-Pack Epoxy Floor Paint take to reach full hardness?
Full hardness and maximum chemical resistance are achieved 4–5 days after application at 18°C.
Can Crown Two-Pack Epoxy Floor Paint resist chemicals and solvents?
Yes. It withstands detergents, bleaches, weak acids and alkalis (10%), oils, fats, fruit juices, and various solvents.
How should I thin the first coat of Crown Two-Pack Epoxy Floor Paint?
Thin the first coat approximately 20% with Crown Two-Pack Epoxy Thinners to improve adhesion and ease application.
What is the pot life of mixed Crown Two-Pack Epoxy Floor Paint?
The mixed product has a pot life of approximately 12 hours. Only mix what can be applied within one working day.
Can I use Crown Two-Pack Epoxy Floor Paint in chemical plants or laboratories?
Yes. The paint is highly resistant to chemicals and ideal for use in laboratories, chemical plants, and other industrial areas.
Is Crown Two-Pack Epoxy Floor Paint suitable for vehicle showrooms and garages?
Yes. It provides a durable, abrasion-resistant finish suitable for pedestrian and vehicular traffic.
Can Crown Two-Pack Epoxy Floor Paint be applied with a roller or spray?
Yes. You can apply it using a brush, roller, or spray. When spraying, always use protective masks.
Do I need to wait before applying the second coat of Crown Two-Pack Epoxy Floor Paint?
Yes. Allow the first coat to properly adhere and partially cure. Follow the recommended drying times before applying subsequent coats.
Can Crown Two-Pack Epoxy Floor Paint be used in areas with continual wet cleaning?
Yes. It forms a tough, impervious film suitable for areas with frequent wetting and cleaning processes.
How do I prepare a new concrete floor before applying Crown Two-Pack Epoxy Floor Paint?
Ensure the concrete is fully cured and dry. Clean thoroughly and remove any laitance or loose particles before applying the paint.
Can Crown Two-Pack Epoxy Floor Paint be applied on damp concrete?
No. Application on damp surfaces can prevent proper curing and affect adhesion and durability.
What surfaces should I avoid using Crown Two-Pack Epoxy Floor Paint on?
Avoid applying over previously painted surfaces that are not fully removed, and over new concrete that has not fully cured.
How long should I wait before using a floor coated with Crown Two-Pack Epoxy Floor Paint?
Light foot traffic can usually resume after 24 hours, but full hardness and chemical resistance take 4–5 days.
Crown Two-Pack Epoxy Floor Paint TDS
for full technical specifications and application guidance.
mainah –
The best modern floor paint