Description

Dura Coat Paint Vinyl Silk Emulsion is based on the Acrylic/Vinyl copolymer resin with good quality pigments. It has excellent hiding power and the porous nature of the film allows new surfaces to breath and dry out easily. It contains lead free pigments making it non- toxic.

Finish: An even high sheen(silky) finish equal to 50% of good quality gloss enamel paint. Semi-gloss-semi matt and rich

Application: By brush, roller or spray

Thinning:

Supplied ready for use therefore no thinning is required. If applied by spray then thin with water.

Drying time: Tough Dry: 20–30 mins

                        Re coating: 3 hours

Cleaning:

 Clean all equipment with water

Colour Range: 

Available in a wide range of colours from Dura Coat Colour cards and Dura Coat Classic FanDeck.

Spread Rate: 

13-15 m²/litre when applied on smooth plasters. Spread rate will vary if applied on rough surfaces.

Pack Sizes: 1 litre, 4 litre, 20 litre

SPECIFICATIONS:

Ensure surface to be painted is clean, dry, free from dust, grease, oil or any loose materials.

1. New Cement or Plater Surfaces: Apply three coats of DuraCoat Vinyl Silk unthinned for better results. If preferred, one coat of DuraCoat Vinyl Matt can be applied as a first coat followed by two coats of DuraCoat Vinyl Silk Emulsion

1. Previously painted gloss surfaces: Ensure the gloss paint is completely rubbed down to provide a key. Apply one coat of universal Undercoat of the desired shade followed by two coats of DuraCoat Vinyl Silk Emulsion.

1. Previously Painted Surface: Clean the surface and remove loose, flaking and powdery materials. Apply one coat of DuraCoat Penetrating Primer followed by two coats of DuraCoat Vinyl Silk Emulsion.